Three Phase Digital Drives
Parker DC590 SSD DC Motor Speed Controller DRV 230-460 VAC Non-Regenerative DC Three-Phase Digital Drives:
The Integrator series is a single family of both AC drives (AC690+) and DC drives (DC590+) that provides the benefits of common programming, set-up and communication across both technologies.
The Integrator series highly advanced DC drive meets the demands of the most complex motor control applications. Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.
The advanced DC590 series 4-quadrant variable speed DC drives offer current ratings of up to 2700A, function block programming, configurable I/O and extensive application software, meeting the demands of the most complex DC motor control applications.
Single Phase Analog Drives
506/507/508 Series Drives:
The 506, 507 and 508 series drives break new ground in cost-effective DC motor control.
Available in 3, 6 or 12A armature ratings, the feature packed minimum footprint design is ideal for speed or torque control of permanent magnet or shunt wound DC motors fed from single phase supplies.
512C Series Drive:
Isolated control circuitry, a host of features, and extremely linear control loop make the 512C ideal for single motor or multi-drive applications.
The 512C is suitable for controlling permanent magnet or field wound DC motors in speed or torque control, and can be used “open loop” with armature voltage feedback, or with DC tach feedback for enhanced regulation and speed range.
Chassis mount, IP00 rating.
514C Series Drive:
The regenerative 514C DC drive offers full four quadrant control of DC motors from single phase supplies.
As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required.
514C can be used “open loop” with armature voltage feedback, or with DC tach feedback for enhanced regulation and speed range.
Chassis mount, IP00 rating.
Micro Drives
MicroDrive is a microprocessor-based closed loop DC SCR drives offering an integrated, programmable digital display.
Originally developed for the conveyor pizza oven, MicroDrives have found broad application across many industries. Of particular value to the OEM designer / plant operator is the integrated drive, display, and logic controller functionality all in one unit.
The MicroDrive comes in two styles depending on the application – the MD Series (for continuous applications) and the MD Plus Series (for start/stop or applications requiring rapid drive response time).
